DSC PowerSeries & Alarm.com
The DSC PowerSeries is a security system platform that can use Alarm.com through a compatible System Enhancement Module. Existing PowerSeries systems may be able to use their current panel when activating compatible Alarm.com service through True-Link.
How to Find Your DSC PowerSeries IMEI
The SEM serial number for the DSC PowerSeries is found on the sticker of the cellular module.
The serial number is printed on the cellular module following SN/IMEI.
Default Codes
Installer code: 5555
Master Code: 1234
Activating Your DSC PowerSeries with Alarm.com
1. Locate your panel's IMEI using the instructions on this page.
2. Choose your True-Link plan here and provide the IMEI during checkout.
3. Keep your panel powered on until activation is complete.
Not sure whether your panel is available? Use our Panel Status Checker before purchasing your plan. If you are switching providers, confirm your communicator supports LTE before cancelling your existing service.
Important Information
'- Panel: PC1616, PC1832 or PC1864 with firmware 4.2 (4.20) or later.
- Communicator: a compatible Alarm.com LTE SEM, such as SEM210 or SEM300.
Complete the required SEM installation and local panel setup before activation is finalized.
For a new SEM account, provide the current panel installer code with your activation details. After account setup and installation, let the SEM complete its initial zone scan without using the keypad.