Interlogix NetworX & Alarm.com
The Interlogix NetworX family can use Alarm.com through compatible communication hardware. If you have an eligible NX4, NX6, NX8 or NX8E installed, you may be able to use the existing panel when activating service through True-Link.
How to Find Your Interlogix NetworX IMEI
Using the keypad:
1. Press [*][92].
2. Enter the installer code.
3. Press [192][#].
4. The 10-digit number displayed in Zone 192 is the serial number used for Alarm.com.
Alternatively, the serial number is printed on the cellular module following SN/IMEI.
Default Codes
Installer code: 9713
Master Code: 1234
Activating Your Interlogix NetworX with Alarm.com
1. Locate your panel's IMEI using the instructions on this page.
2. Choose your True-Link plan here and provide the IMEI during checkout.
3. Keep your panel powered on until activation is complete.
Not sure whether your panel is available? Use our Panel Status Checker before purchasing your plan. If you are switching providers, confirm your communicator supports LTE before cancelling your existing service.
Important Information
'- Supported boards: NX-4 v2, NX-6 v2, NX-8 v2 and NX-8E.
- Hardware: a compatible NetworX gateway and Alarm.com LTE module, installed and enrolled on the panel.
Complete any required hardware installation and local setup before activating.